![background image](http://html1.mh-extra.com/html/baby-trend/cv88a/cv88a_owners-manual_3231886014.webp)
25
26
Copyright © 2016, Baby Trend, Inc.
Copyright © 2016, Baby Trend, Inc.
5.0 Installation and Use
5.0 Installation and Use
4. Route LATCH belt through the rear facing
safety belt path (Fig. 25a) leaving the
adjuster side of the LATCH belt on the
child’s LEFT side (Fig. 25b).
NOTE: Remove any twist in webbing to
ensure the webbing lies flat for securing
the restraint to the vehicle.
5. Attach the LATCH connector to the
vehicle’s LATCH anchor with the release
button facing downwards towards the
seat cushion (Fig. 25c). Ensure that the
adjuster side of the LATCH belt is on the left
side of the car seat.
NOTE: If the adjuster is facing the
wrong direction or LATCH connector is
upsidedown, the restraint will not secure to
the vehicle properly.
6. Put weight in the seat with your hand to
compress the vehicle seat cushion then
attach the LATCH connector to the vehicle’s
LATCH anchor and pull adjuster belt tight
as possible (Fig. 26a). Pull up on LATCH
connector as to ensure the LATCH is secure.
7. Lower flap and secure hook and loop
fasteners and all snaps (Fig. 26b).
8. Ensure the rear facing angle indicator
bubble is located between the boundary
lines (Fig. 26c).
9. Check for movement of the restraint at the
safety belt path. The restraint should not
move more than 1 inch in any direction. If the
restraint moves more than 1 inch, repeat all
steps until all safety steps are met.
Fig. 25a
Fig. 25b
Fig. 25c
Fig. 26a
Fig. 26b
Fig. 26c