background image

15

16

Copyright © 2016, Baby Trend, Inc.

Copyright © 2016, Baby Trend, Inc.

 5.0  Installation and Use

 5.0  Installation and Use

Routing paths for forward facing installation

5.1  Child Placement in Restraint

1. Place child in the restraint with the child’s back flat against the back 

of the restraint and the child’s bottom touching the seat.

2. Place harness straps over the child’s shoulders. 

Note: Check the height of the harness straps at the child’s shoulders.

3. Place 5-point crotch buckle in rear position for rear facing and outer 

postion for forward facing.

4. Insert the buckle tongues into the buckle. 

Note: Pull up and test 

buckle tongues to be sure they are secure.

5. Place chest clip at arm pit level. Insert chest clip tabs and press 

together. Pull outward on chest clip’s ends to be sure it is secure.

6. Pull on harness adjuster to tighten harness straps. A snug strap 

should not allow any slack. It lies in a relatively straight line without 

sagging. It does not press on to the child’s skin or push the child’s 

body into an unnatural position.

WARNING!

DEATH or SERIOUS INJURY can occur:

•  Use only in a rear facing position when using restraint with an 

infant weighing less than 22 lbs. (9 kg).

•  Use only with children who weigh between 5 - 65 lbs. (2.3 - 29 

kg) and whose height is 50 inches (127 cm) or less. Rear Facing 

with the removable upper seatback removed; 5 - 22 pounds. Rear 

facing with removable upper seatback installed; 5 - 40 lbs. (2.3-

18.1 kg). Forward facing 1 year and 23 - 65 lbs. (10.43 - 29 kg).

•  Snugly adjust the belts (Harness) provided with this child 

restraint around your child. Snug means you can not pinch 

webbing once buckled.

•  Secure the top anchorage strap provided with this restraint.
•  Secure this child restraint with the vehicle’s child restraint 

Anchorage system (LATCH) if available or with a seat belt.

•  Follow all instructions on this child restraint and in the written 

Instructions located on the back of the seat. Do not use without 

instructions. Call 1-800-328-7363 to obtain instructions.

•  Use vehicles seat belt (not LATCH) for children weighing more 

than 45 lbs (20.5 kg).

•  Register your child restraint with Baby Trend.
•  DO NOT place this rear facing child seat in a front seat that has 

an active airbag.

•  NEVER leave child unattended under any circumstance.

Lap belt with 

top tether

Lap/Sholder belt 

with top teather

LATCH Lower anchor 

with top teather

Содержание CV88A

























Отзывы: