23
24
Copyright © 2016, Baby Trend, Inc.
Copyright © 2016, Baby Trend, Inc.
5.0 Installation and Use
5.0 Installation and Use
Rear Facing Installation with LATCH Lower Anchor. With Headrest.
Requirements. See section 2.2:
Weight is between 5 and 40 lbs (2.3 kg and 18.1 kg),
and head is 1 inch below the top of the seat.
1. Squeeze recline handle and recline the seat to
positions 1, 2, or 3. Angling the seat will keep the
baby’s head back and airway open.
Note: If needed a rolled up towel or pool noodle can
be used for extra elevation and angle adjustment.
2. Place this restraint in a rear seating position and ensure vehicle is level.
3. Unsnap the 2 front snaps and the 2 side
snaps. Lift and fold back padding.
5.4 Rear Facing Installation with LATCH Lower Anchor.
Requirements. See section 2.1:
Weight is 5 - 22 lbs (2.3 - 10 kg)
The top of head has
NOT
reached max height
red line on seat back. Refer to warning label on
top of seat for reference.
The Convertible car seat, in a Rear Facing installation, was designed
with a removable upper seatback to allow for a proper installation
when the upper seatback comes in contact with the front seat. If the
upper seatback comes in contact with the front seat and prevents
a 45 degree installation, remove the upper seatback and install
the Convertible at 45 degrees per the instructions in this section.
To remove the upper seatback refer to section 5.11 and read all
WARNINGS.
Reinstall the upper seat back when child reaches 22 lbs. (9.98 kg.),
or the top of the child’s head has NOT reached max height red
line on seat back. Keep child rear facing as long as possible. If
you have any questions regarding the use of the upper seat back
or any other questions please contact Baby Trend Customer Service
at 1-800-328-7363.
Never use a Top Tether connector in a rear facing
installation!!
WARNING
Without headrest
With headrest
Rear of Vehicle
