39
40
Copyright © 2016, Baby Trend, Inc.
Copyright © 2016, Baby Trend, Inc.
5.0 Installation and Use
5.0 Installation and Use
5.13 Harness Length Adjustment
1. Unhook the harness straps from the metal plate and move to the
desired adjustment.
2. Ensure the harness strap ends are fully
hooked on the metal plate. Both sides must
be threaded in the same position.
5.14 Locking Clip Use
1. If your vehicle lap/shoulder belt requires the
use of a Locking Clip to prevent the belt from
loosening after installation, thread the locking
clip on the belt as close to the latch plate as
possible – within 1 inch (2.54 cm).
5.15 Upper Seat Back Removal and Installation
1. Removal: Remove the upper seat back by
lifting the release tab and pulling up on the
upper seat back.
NOTE: DO NOT store the upper seat back in
the passenger compartment. Store the upper
seat back in a secure location like your trunk
or garage.
2. Installation: Align the upper seat back rods
and push rods into the openings until you
hear the seat back lock into place. Pull up on
the upper seat back to ensure the removable
upper seat back is locked in position.
The upper seat back must be installed:
When the child weighs more than 22 lbs (9.98 kg)
or
Top of head has reached max height red line on seat
back.
or
The restraint is forward facing.
WARNING
1 inch (2.54 cm)
Click
