C. Right needle
Place thread on the second (yellow) spindle and follow the yellow color – coded path, ending with the
right needle.
D. Left needle
Place thread on the far – left (orange) spindle and follow the orange color – coded path, ending with
the left needle.
•
When threading the eye of the needles, use the needle threader, see page 10.
NOTE: Each needle thread must catch in its
respective guide and under one side of
the thread plate. (Figure 12).
E. Place all threads under and to the left of the
presser foot and make a few stitches to
begin the chain. (Figure 13)
IMPORTANT:
If a looper thread breaks or runs
out, while the other threads remain intact, it is
necessary to follow this rethreading sequence:
1. Unthread the eyes of the needles.
2. Rethread the looper.
3. Rethread needle eyes.
If you forget to unthread/rethread the needle
eye, thread will be wrapped around the lower
looper out of sequence and, when you begin to
sew, the looper thread will break. The needles
must always be threaded last.
9
