B-TEK Scales WorldWEIGH C200 Series, Руководство пользователя

Страница: 17 / 20

C200 series bench scales service manual
- 13 -
7.3.1 Calibrate linear
1)In the factory mode hold the MODE key until “
Func
” appears for roughly 5 to 6
sec., and find the “CAL” function from the parameters.( Reference Function
setting table )
2) Press MODE key to enter calibration and press ZERO/TARE key to select
“Linear” function (Remove all the weight from the platform) then press MODE
key, the display will be show “LOAD 0” and wait a moment.
3) When the display show “LOAD 1” then put a weight (1/6 capacity)on the platform.
Wait a moment.
4) When the display show ”LOAD 2” then put a weight (1/3 capacity)on the platform
and wait a moment.
5) When the display show ”LOAD 3” then put a weight (2/3 capacity)on the platform
and wait a moment.
6) When the display show ”LOAD 4” then put a weight (Full capacity)on the platform
and wait a moment then it will return to the self-test mode.
Linear calibration success.