C200 series bench scales service manual
- 9 -
SECTION 6 FUNCTION SETTINGS
6. 1 Enter function setting mode
1) Hold MODE key until LOW/TOTAL display shows “
Fset
“ .
2) Release MODE key, display changes to “
F0 sel
“
To change setting parameter, press ZERO/TARE key
3) To confirm setting change and forward the next title, press MODE key.
To exit function setting mode and enter the normal weighing mode, press ADD key
Note 1: when in normal weighing mode, hold LMT key for 3 second, will enter
backlight setting.
6. 2 Function settings (Note f7-f11, have no function with no output port) Bold
selection indicates default.
Fun
ctio
n
Describe
F0.
sel
Set enable/disable limit function,
1, disable
, 2, enable
F1.
co
Set number of points for judgment,:
1 always judge,
2, judge only when the scale is stable
F2.
li
Set judgment range:
1, except zero point or below (minus value
), 2, any area
F3.
pn
Set number of points for judgment,:
1, one point setup (judges between OK and LO),
2: upper-limit and lower-limit values are setup (judges among hi, ok,
lo)
F4.
bu
Set buzzer for limit function:
1, disable
, 2, OK (between hi and low), 3, lo or hi (except OK)
F5.
ao
Set auto zero track:
1
：
off,
2
：
0.5d
，
3
：
1d
，
4
：
2d
，
5
：
4d
. a.p
Set auto power off:
1, disable,
2, power off after 3 minutes from no operate, (stable and no hit key)
Содержание WorldWEIGH C200 Series
Страница 1: ...V 1 19 C200 Series Bench Scales User s guide ...
Страница 2: ......
