B-TEK Scales WorldWEIGH C200 Series, Руководство пользователя

Страница: 11 / 20

C200 series bench scales service manual
- 7 -
Zero the scale by pressing the ZERO/TARE key if necessary. If a container is to be
used, place the container on the scale and tare as discussed earlier.
Place a known quantity of items on the scale. After the weight display is stable enter
the quantity of items using the numeric keys followed by SMPL SET key. The
number of units will be displayed on the "Quantity" display and the computed
average weight will be shown on the "Unit Weight" display.
As more items are added to the scale, the weight and the quantity will increase.
If the scale is not stable, the calculation will not be completed. If the weight is below
zero, the quantity display will show negative count.
When LIGHT (unit weight window) indicator flash, this means current unit weighing
it too low for this specification scale, please try to use other specification scale,
otherwise, you will can’t get accurate count data.
*if you input a incorrect data, press C/AC key to clear.
5.3.2 Entering a known unit weight
If the unit weight is already known then it is possible to enter that value using the
keypad.
Enter the value of the unit weight using the numeric keys followed by pressing the
UNIT. W SET key. The "Unit Weight " display will show the value as it was entered.
The sample is then added to the scale and the weight will be displayed as well as
the quantity based upon the unit weight.
When LIGHT (unit weight window) indicator flash, this means current unit weighing
it too low for this specification scale, please try to use other specification scale,
otherwise, you will can’t get accurate count data.
*if you input a incorrect data, press C/AC key to clear.
5.3.3 Changing Units press RE to change from lbs to kg
5.4 Accumulation.
5.4.1 normal accumulate counting
before accumulation, please set unit weight, then load partial samples, quantity
window will show current counts, after
○ indicator on
, press ADD key, - - 7 - -
quantity windows will show current total weight (TOTAL indicator on) for 3 second,
then return to normal count mode.
please note, before you start next accumulate, scale must return to zero.
5.4.2 Accumulation mode
When in normal count mode, press MODE key, scale will enter accumulation mode.
Weight window show current count value, unit weight show new total weight,
quantity window show current total weight (TOTAL indicator flash).
In accumulation mode, after add sample and O indicator on, press ADD key,
quantity window will show total count.