B. Braun Perfusor compact, Руководство по обслуживанию

Страница: 29 / 82

Service Program
3
Perfusor® compact, 2.1 gb 3 - 9
2. Free 20ml and 50ml type
The files that can be loaded for setting free syringe types are
saved in the directory of the Service Program or are available
from B.Braun.
- Reloading free types
Select syringe types which can be reloaded from the file
list. Then load the corresponding type. The data is dis-
played when the type was loaded. Note the syringe type
number and the syringe type on the unit to ensure a clear
assignment. The article number and the syringe type are
only displayed after loading. Nothing is displayed under
“Version, free 20ml/50ml types”!
- Deleting free types
Reload the 20ml_0.spt or 50ml_0.spt file with zero-value
syringes. Now, the corresponding free syringe type is de-
leted. If necessary adapt the syringe selection (e.g. when
the selection was set to “Free type”, but all free types
were deleted).
Note
Adapt the syringe table after all modifications were carried out
(see „Syringe Table and and Quick Reference Guide“
➨
p. 4 - 5)
3. ROM 20 ml/ ROM 50 ml table
Display of the syringe types saved in the Perfusor compact
ROM.
Modes Menu
1. Modification data
Display and setting of:
max. basal rate, bolus rate, staff call, alarm tone, pressure
stage, last syringe type and Dianet address.
Alarm tone setting:
- For units with unit software up to PLAA00063.3
(Service Program version 55004):
0 = continuous tone with 3 Hz intermittent
1 = continuous tone
2 = continuous tone with modulation 2.4 kHz
3 = continuous tone with modulation 4.8 kHz
Do not use mode 3.
Fig.: 3 - 10
Fig.: 3 - 11
Fig.: 3 - 12