B. Braun Aquaboss CCS, Инструкция по эксплуатации

Страница: 36 / 75

System data parameters
Section 1 – Operating Instructions
Rev. 2.8 Date 2019-02-04
Software version 1.00
CCS
Chapter 8
Page 8-5
Service interval
Interval between two routine service checks.
0 to 12 months (0 = -- = off).
The software version/save date is displayed by pressing the two middle
function keys.
Operating hours of the system
Menu item 6.9 provides information about the device’s operating hours.
6.7 System type
CCS-Z X.Y
V XX.XX-XX
Esc
6.7 System type
SW-Date: XX.XX.XXXX
Esc
6.8 Routine check
XX months
Esc
6.9 Hours system
XXXXXX hours
Esc
NOTE
The operating hours remain saved even when the EPROM is replaced.
Economy mode
Wherever a solenoid is in economy mode, a “1” is indicated.
Remote on/off
The switching mode of an assembly to be controlled, e.g. a connected
remote control (accessories) is shown here.
The remote control input can be pulse or slope triggered.
Kp Proportional amplification of the PI controller.
Ki Integration time constant of the PI controller.
6.10 Economy mode
SV 11 12 21 22 31 32
X X X X X X
Esc
6.11 Remote on/off
XXXXXXXX
Esc
6.12 Control param.
Line X.X
Kp=X.X Ki=XXXms
Esc
 