B. Braun Aquaboss CCS, Инструкция по эксплуатации

Страница: 32 / 75

System data parameters
Section 1 – Operating Instructions
Rev. 2.8 Date 2019-02-04
Software version 1.00
CCS
Chapter 8
Page 8-1
8. System data parameters
8.1 Menu structure
A system test is carried out after switch-on. The display lamps light up for
3 seconds. If the power supply is interrupted, the mode of operation last
selected is saved.
Display of the system type CCS P x.y.
The x stands for the number of concentrates to be pumped, the y for
the number of floors. Display during test (approx. 3 seconds).
If one container has sent an empty signal, the following appears on
the display:
Container x.y empty (display alternates if more than one container
is empty).
If there is no malfunction, any maintenance work due is displayed,
e.g. “Routine check”, “Battery empty” (flashing).
Any malfunctions are shown in the third display line.
Alarm xx: Type of fault
Operating
state Operating
phase Function keys
F1
F2 F3 F4
System off Menu Hand Auto
Hand Menu Off Auto
Automatic On / Off Menu Hand
CCS-PX.X hh:mm
Lauer
Test
CCS-PX.X hh:mm
Operation mode display
Routine check
Menu
CCS-PX.X hh:mm
Operation mode display
Battery empty
Menu
The program branches into the parameter setting level by requesting the
program item Menu from the basic control unit state and during opera-
tion. System characteristics can be requested in the sub-program points
of this level. In addition, the system control parameters can be modified.
Parameters that are related to the system's functional safety and param-
eters used by technical service personnel for checking system functions
are protected by passwords and may only be changed by authorized
personnel.
Esc changes back to the previous menu inc. value acknowledgement.
 Move selection upwards.
 Move selection downwards.
+/- Value input.
Enter Activate selection.
0 Language
1 Date/Time
2 Auto on/off
3 Container Reset
4 Reset alarms
5 Service interval
6 System data
7 Maintenance pgm.
8 Fault history
Esc
 
Enter