The
AZZA
366 MAINBOARD SERIES
Page 45
CPU Vcore Select (only available on the 366X-AS)
If you want to over-clock your CPU you need to adjust the core voltage. When you press
enter a menu with a range of voltage selections will appear. Before you change the volt-
age, please refer to the previous menu PC Health Status (section 3.9) to check what the
Vcore Voltage is for your CPU. If this field is made too high or too low it will cause dam-
age to your CPU. If you have set this voltage too low you may not be able to start your
PC. To overcome this problem use the Ins Key.
Auto Detect DIMM/PCI Clk
When “Enabled” is selected, the mainboard will detect the presence of devices on DIMM
and PCI slots. When there is no device present on some of the PCI or DIMM connectors,
the clock on the related DIMM and PCI slot will be disabled to reduce the Electro-Magnetic
Interference (EMI).
Spread Spectrum
When Spread Spectrum is enabled, the EMI radiation on this mainboard will be reduced.
CPU Clock
You can use this field to adjust the front side system bus clock speed of the CPU. The
clock frequency can be incremented by +/- 1MHz. This allows you to fin-tune the system
performance of your PC.
3.11. Load Optimized Defaults
Managing The PC BIOS
CMOS Setup Utility – Copyright ( C ) 1984 - 2001 Award Software
!
!
!
!
Advanced BIOS Features
!
!
!
!
Frequency/Voltage Control
!
!
!
!
Advanced BIOS Features
!
!
!
!
Advanced Chipset Features
Set Supervisor Password
!
!
!
!
Integrated Peripherals
Set User Password
!
!
!
!
Power Management Setup
Save & Exit Setup
!
!
!
!
PNP/PCI Configuration
Exit Without Saving
!
!
!
!
Health Status
ESC : Quit
←
←
←
←
↑↑↑↑
↓↓↓↓
→
→
→
→
: Select Item
F10 : Save & Exit Setup
Load Optimized Defaults
Load Optimized Values
