The
AZZA
366 MAINBOARD SERIES
Page 34
!
AGP Mode
This item allows you to select 1x, 2x or 4x AGP mode.
!
AGP Driving Control
The recommended setting for this field is the default “Auto”. If you have an unstable
AGP card you may use this field to choose the appropriate settings. If you do need to
tune the timing, please consult your AGP Card manual or Vendor.
!
AGP Driving Value
This item allows you to adjust the AGP driving force.
!
AGP Fast Write
Some AGP cards, like G-Force, support AGP fast write. If you have an AGP card that
supports this mode you can enable this field. If your AGP card does not support the
fast write mode then leave this field “disabled”.
!
AGP Master 1 WS Write
When Enabled, writes to the AGP are executed with one-wait states.
!
AGP Master 1 WS Read
When Enabled, reads to the AGP are executed with one-wait states.
CPU & PCI Bus Control
When you select this field the following menu will appear:
!
PCI1/PCI2 Master 0 WS Write
When enabled, writes to the PCI 1/PCI 2 bus are executed with zero wait states.
!
PCI1/PCI2 Post Write
You can Enable or Disable the chipset's ability to use a buffer for posted writes initi-
ated on the PCI 1/PCI 2 bus.
!
PCI Delay Transaction
The chipset has an embedded 32-bit posted write buffer to support delay transactions
cycles. Select Enabled to support compliance with PCI specification version 2.1.
Memory Hole
You can reserve this area of system memory for ISA adapter ROM. When this area is re-
served, it cannot be cached. The user information of peripherals that need to use this
area of system memory usually discusses their memory requirements.
Managing The PC BIOS
PCI1 Master 0 WS Write
PCI2 Master 0 WS Write
PCI1 Post Write
PCI2 Post Write
PCI Delay Transaction
Item Help
Menu Level
!!
!!
!!
!!
CMOS Setup Utility - Copyright (C) 1984 - 2001 Award Software
CPU & PCI Bus Control
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
