The
AZZA
366 MAINBOARD SERIES
Page 42
!
Date (of Month)/Resume Time (hh:mm:ss)
When RTC Alarm Resume is enabled, your can setthe date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
!
IRQs Activity Monitoring
The following is a list of IRQ’s, Interrupt ReQuests, which can be exempted much as
the COM ports and LPT ports above can. When an I/O device wants to gain the at-
tention of the operating system, it signals this by causing an IRQ to occur. When the
operating system is ready to respond to the request, it interrupts itself and performs
the service.
Note: When set On, activity will neither prevent the system from going into a power
management mode nor awaken it.
3.8. PNP/PCI CONFIGURATION
Managing The PC BIOS
CMOS Setup Utility - Copyright (C) 1984 - 2001 Award Software
IRQs Activity Monitoring
[ON]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
Item Help
Menu Level
###
###
###
###
Primary INTR
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
CMOS Setup Utility - Copyright (C) 1984 - 2001 Award Software
PNP/PCI Configurations
Item Help
Menu Level
#
#
#
#"
"
"
"
Select Yes if you are us-
inga Plug and Play capa-
ble operating system.
Select No if you need the
BIOS to configure non-
boot devices.
PnP OS Installed
Reset Configuration Data
Resources Controlled By
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
[No]
[Disabled]
[Auto (ESCD)]
[Disabled]
[Enabled]
[Enabled]
