AB-7050
12
Installation steps: Neosensor on the Thermoplate for open wiring with Wall-direct mounting kit
1) Attach the mounting plate of the Wall-direct mounting kit to the Thermoplate for open wiring on the mounting surface.
2) Attach the main unit of the Wall-direct mounting kit to the mounting plate. (See Fig. 11.)
3) Connect the lead wires of Neosensor to the wires from the load. (See Figs. 20 and 21.)
Note:
The number of the lead wires differs depending on the models. Note that the Pt100 temperature sensor model with modular connection
has a modular jack instead of lead wires. (Model TY7043Z0P01(-1))
4) Remove the cover of Neosensor as shown in Fig. 14.
5) Set the depth change levers on the bilateral sides of the Neosensor main unit to the upper position (indicated with "L" shown
in Fig. 17).
6) Mount the main unit of Neosensor on the main unit of the Wall-direct mounting kit with four mounting screws (M3
×
16)
supplied with Neosensor.
7) Attach the cover back to the Neosensor main unit and complete the installation. (See Fig. 14.)
Figure 10. Installation: Neosensor with Wall-direct mounting kit (on Thermoplate for open wiring)
Assembling the Wall-direct mounting kit (the main unit to the mounting plate)
Figure 11. Assembling the Wall-direct mounting kit
Neosensor
Wall-direct mounting kit
(optional)
Thermoplate for open wiring
(optional)
66.7 mm
Wires
from the load
Mounting plate
of Wall-direct mounting kit
2 pan-head machine screws (M4
×
8)
of Wall-direct mounting kit
Main unit
of Wall-direct mounting kit
Lead wires of Neosensor
1 flat-head machine screw (M3
×
16)
of Wall-direct mounting kit
Main unit of Neosensor
4 flat-head machine screws
(M3
×
16) of Neosensor
Cover of Neosensor
Engage.
Mounting plate
Rear side of the main unit
Attach.
