manualshive.com logo in svg

Azbil AVP200, Руководство пользователя

Поделиться
Скачать
Azbil AVP200 Скачать руководство пользователя страница 121

6-1

Chapter 6:  Cautions Regarding 

Explosion-proof Models

Cautions to ensure safe operation

 Warning

Do not perform wiring work, turn on the electricity, etc., when your hands are wet. 

There is a risk of electric shock. Perform this work with the power supply turned 

off, and with dry or gloved hands.
When wiring in a hazardous area, work according to the methods prescribed by the 

guidelines for the hazardous area.
For flameproof explosion-proof specifications, do not under any circumstances 

open the cover during operation (when powered up).

 Caution

After installing the device, do not place your body weight on it, use it as a scaffold, 

etc. There is a risk that it could fall over.
Do not touch the device unnecessarily while it is in operation. Depending on the 

environment in which the device is used, there is a danger that the surface of the 

device may be very hot or very cold.
When opening the cover of the terminal box, be careful of the edges of the cover, 

the threads of the screws on the main unit, etc. There is a possibility of injury.
Use a DC power supply that has overload protection. An overload can cause the 

emission of smoke and fire.
Bringing tools and the like into contact with the glass portion of the display can 

cause damage or injury. Exercise sufficient caution. In addition, be sure to wear 

safety glasses.
As this product is extremely heavy, watch your footing, and be sure to wear safety 

shoes.
When the device is in operation, do not touch moving parts such as the feedback 

lever. Your hand may become caught, resulting in injury.
Supply power correctly based on the specifications. An incorrect power input can 

damage the instrument.
When working in a high-temperature or low-temperature environment, wear gloves 

and other protective equipment.
Do not bring magnets or magnetic screwdrivers near the device. There is a possibil-

ity that the control valve will move in response.

When using an explosion-proof model, be sure to use the product correctly, paying suffi-
cient attention to the cautions in this chapter.

Содержание AVP200































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды