3
THE COMPONENTS USED IN SHAFT AND MACHINE ROOM
Prewired Inspection Box
KDM Pit Control Box
Pit Stop, Socket and
Alarm Box
Inspection and Recall
Command Box
In cartop, controller
and pit to move the car
Controls car circuit
Controls pit circuit
Connected to Controller
Stop Button
Audible and Visual
Alarm
Braking Resistor
Pit Leaving Switch
Used to stop the lift in
machine room
Used under the car
Connected to Controller
Used at the base
landing floor
Magnetic Switches
Flex Holder
Strip and Round
Magnets
Shaft Limit Switch
Used on the cartop
Used on the car wall
Used on the rails
Used on the cartop
FIXING MRL CONTROLLER BOX TO THE WALL
MRL type lift controller box is placed next to the
door at the top floor.
Be careful to install control panels so that the
ventilation holes are not exposed.
Use screws and brackets given to fix the metal box
to the wall as shown below.
