AXXIOM Manufacturing, Inc. SCHMIDT, Руководство по эксплуатации и обслуживанию

Страница: 15 / 60

15
© 2013 Axxiom Manufacturing, Inc.
2.1 Notes to Distributors and Owners
2.1.1. Verify that the deadman, twinline (or cords), and the operation and maintenance manual
are included with the abrasive blaster when it is received. Verify that the deadman,
twinline (or cords), and the operation and maintenance manual are included with the
abrasive blaster when it is delivered to the purchaser.
2.1.2. This equipment is intended for knowledgeable and experienced users. No person or
persons should be allowed to operate this equipment without first receiving proper
training in abrasive blasting operation and use of this equipment.
2.1.3. Immediately notify Axxiom Manufacturing, Inc. of any instances of use of this
equipment in any manner other than the intended application. See Section 4.0.
2.1.4. Only qualified personnel should load and unload this equipment for shipping. Slings or
other lifting devices must only be attached to the designated lifting points. See the
lifting diagrams shown in Section 2.6.
2.1.5. For further information on options and accessories available for Schmidt® abrasive
blasters visit the Axxiom website or contact us:
Axxiom Manufacturing, Inc.
11927 South Highway 6
Fresno, Texas 77545
Phone: 1-800-231-2085
Fax: 1-281-431-1717
Website: www.schmidtabrasiveblasting.com
2.2 Abrasive Blaster Operational Specifications
Maximum Working Pressure 125 or 150 psig @ 250°F (see ASME nameplate)
Maximum External Pressure Not designed for external pressure
Minimum Metal Temperature -20°F @ 125 or 150 psig (see ASME nameplate)
Air Consumption See Section 13.0 table 1
Abrasive Consumption See Section 13.0 table 2
Blast Hose Size See Section 13.0 table 3
Electrical requirements See Section 3.7
Abrasive Capacity 0.5 & 0.9 cu. ft
2.3 Important Reference Numbers
Fill in the Abrasive Blaster model number, serial number, and other information in the blank
spaces below. This information will be needed for reference when service, maintenance, or
technical support is required.
Blaster Model Number
Blaster Serial Number National Board Number
Blaster Piping Size
2.0 Specifications and General Information