AXMINSTER WORKSHOP 108512, Руководство пользователя

Страница: 4 / 28

SAFETY
4
The following is a list of safety precautions you must consider when using a Planer/Thicknesser:
ALWAYS REMEMBER TO DISCONNECT THE POWER TO THE PLANER/THICKNESSER
WHEN MAKING REPAIRS OR ADJUSTING BLADES AND GUARDS.
ALWAYS REMEMBER TO READ THROUGH THE MACHINE INSTRUCTIONS SUPPLIED.
• Eye protection, ear protection, respiratory protection and chip extraction are highly recommended when
operating this machine.
• Do not wear gloves, loose clothing, jewellery, or any dangling objects when operating a planer and ensure
that long hair is tied up out of the way.
• All guards must be in place and fully operational. If a guard seems to be missing or damaged,
adjust,replace or repair immediately.
• Ensure that all visible electrical components (cables, switches) are in good condition without damage.
• Hands and fingers must be kept clear of the blades - push blocks are highly recommended.
• Use only the recommended blade size & type.
• Ensure all blades are sharp & in good condition.
• The blades must be adjusted in accordance with the instruction manual.
• Never thickness plane small pieces - 12” in length minimum.
• Long material should be supported at the same height as the planer or thicknesser table.
• Ensure you are comfortable before you start work, balanced, not over reaching.
• Do not use the machine if you are under the influence of drugs or alcohol, tired or distracted.
• Do not allow children to operate the machine - without adult supervision.
• Do not use the machine in an excessively damp or wet environment.
• Never leave the machine unattended when it is running.
• Keep the machine table and surrounding work area free from excessive dust & debris to help prevent
slipping or tripping.
• Ensure that the machine is stable on the floor and wheel bases are locked off.
• More safety information can be found at: http://www.hse.gov.uk › pubns › wis17