AXIS P5635-E Mk II PTZ Dome Network Camera
Specifications
Function
Pin
Notes
Specifications
DC Output
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
12 V DC
Max load = 50 mA
GND
1
Ground
Digital input – Connect to pin 8 to activate, or leave
floating (unconnected) to deactivate.
0 to max 30 V DC
Configurable
(Input or Output)
3 – I/O 1
4 – I/O 2
5 – I/O 3
6 – I/O 4
Digital output – Connected to pin 8 when activated,
floating (unconnected) when deactivated. If used with an
inductive load, e.g. a relay, a diode must be connected
in parallel with the load, for protection against voltage
transients.
0 to max 30 V DC, open drain,
100 mA
1
GND
2
DC output 12 V, max 50 mA
A
I/O configured as input
B
I/O configured as output
Axis 10-pin push-pull system connector (sold separately)
When connecting external equipment to the Axis product, an Axis 10-pin Push-Pull System Connector (sold separately) is required in
order to maintain the product’s IP rating.
Mounting the wires requires a crimp tool. To get detailed mounting instructions of the wires, go to
axis.com/support
Connect the 10-pin push-pull system connector to the product’s multi-connector. To locate the multi-connector go to .
10–pin push-pull system connector
20
