down the device faster. Use enough tension so that the cord doesn’t wobble or slip. For strings,
use more tension. There should be enough to create a “guitar string” effect. The string should
make a noise if plucked.
Figure 10 U-shaped Cord Loop
MOUNT GEAR ON BRACKET
On the back of Gear, towards the bottom, two grooves run vertically near the left and right
edges. Similarly, on the mounting bracket, there are two mounting lips. Position Gear flat up
against the Mounting Bracket (both Lips should be inside the bottom-back grooves of the
device). Then, slide the device downwards until the beaded chain or cord loop pulls tight.
