Axis Gear Скачать руководство пользователя | Manualshive

Страница: 33 / 85

background image

If the shade is moving in the wrong direction when you hold the top or bottom capacitive touch
buttons, press the Pair button to reverse directions.

3. Touch and hold the other direction to move the shade to the desired closed position. Press
Set when the shade is at the desired point.

Gear will display blue, green on the bottom two LEDs and all LEDs will flash green twice.

These same calibration points are retained when adding Gear to the AXIS app or a smart home
hub. To adjust the settings to different positions, follow the above procedure again.

If using Gear with the AXIS app or a smart home hub, you may reconfigure Gear on-device at
any time. Any new calibration settings reflect in the AXIS app or through a smart home hub.

https://youtu.be/w51Tg8q95UU

CONTROL:

Touch any position on the Touch Strip to move a calibrated Gear. The top position opens the
shades fully, the bottom position closes the shades fully, and positions in between move the
shades to 25%, 50%, and 75% positions.

An uncalibrated Gear will flash a Not Configured error pattern on the LEDs if an attempt to move
the shade is made. In this case, Gear does not move the shades to any position.

SMART HOME MODE:

To enter Smart Home Mode using on-device controls, press and hold Group+Pair. The Touch
Strip LEDs then flash purple twice. To exit Smart Home Mode, use the same button
combination. The LEDs then blink blue twice.

A more in-depth chapter on Smart Home Mode is included later in this course.

PAIRING:

To use the AXIS app, Gear must pair with the app. When prompted, press Pair for Gear to start
advertising a Bluetooth signal. On pressing Pair, the Touch Strip flashes all LEDs blue twice.

If the LEDs flash purple on pressing Pair, then this means Gear is in Smart Home Mode. In this
case, Gear is not discoverable by Bluetooth. Put Gear back into Bluetooth mode by holding
Group+Pair.

«
...
31
32
33
34
35
...
»

Содержание Gear






















































































Отзывы:

Нет отзывов

Похожие инструкции для Gear

Бренд: PLH Products Страницы: 3

free@home BI-F-2.0.x2

Бренд: ABB Страницы: 36

Бренд: QOLSYS Страницы: 57

Бренд: V-TAC Страницы: 136

Бренд: Philio Страницы: 9

Бренд: Seitron Страницы: 3

Бренд: NGP Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды