11
AXIS 262 - Basic Operation
Note:
A user can be deleted by selecting a
User number from the drop-down list and clicking Remove.
Add a camera
The AXIS 262 can view, record and playback video from up to eight Axis network cameras
simultaneously. When adding or removing a camera, the AXIS 262 stops recording on all
cameras for a maximum of 10 minutes. When a camera is added, it may take up to one
minute for the live stream to be displayed.
To add a camera:
1. Click
> Video Sources in the device’s Web pages.
2. Select an unused Camera number from the drop-down list.
3. Enter the camera name, using a maximum of 32 characters. The following
characters are not allowed \ / ; : | < > * ? “
4. Enter the video server port if the camera is connected to a 4-port video server,
otherwise leave this as 1.
5. Specify the IP address of the camera or video server.
6. If a user name and password are required to access the device (i.e. anonymous
viewer login is not enabled in the device), set the Authentication radio button to
ON.
7. Enter the user ID and password for the device if Authentication is enabled.
8. Add comments about the device if desired and click Save.
a. Select an unused number
b. Enter a user name
c. Select the type of user to create
d. Enter and confirm the password
to be used by the user to log on to
the AXIS 262
e. Click
Save
