AXIOMTEK SBC81872, Руководство пользователя

Страница: 69 / 73

SBC81872 Socket479 All-in-One CPU Card Series User’s Manual
Award BIOS Setup 63
7.11 Supervisor/User Password Setting
You can set either supervisor or user password, or both of then.
The differences between are:
Set Supervisor Password: can enter and change the options
of the setup menus.
Set User Password: just can only enter but do not have the
right to change the options of the setup menus. When you
select this function, the following message will appear at the
center of the screen to assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press
<Enter>. The password typed now will clear any previously
entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press
<Enter>. You may also press <Esc> to abort the selection and
not enter a password.
To disable a password, just press <Enter> when you are
prompted to enter the password. A message will confirm the
password will be disabled. Once the password is disabled, the
system will boot and you can enter Setup freely.
PASSWORD DISABLED .
When a password has been enabled, you will be prompted to
enter it every time you try to enter Setup. This prevents an
unauthorized person from changing any part of your system
configuration.
Additionally, when a password is enabled, you can also require
the BIOS to request a password every time your system is
rebooted. This would prevent unauthorized use of your
computer.
You determine when the password is required within the BIOS
Features Setup Menu and its Security option (see Section 3).
If the Security option is set to “System”, the password will be
required both at boot and at entry to Setup. If set to “Setup”,