AXIOMTEK SBC81872, Руководство пользователя

Страница: 52 / 73

Award BIOS setup
46
z
Swap Floppy Drive
This allows you to determine whether to enable Swap Floppy
Drive or not. When enabled, the BIOS swaps floppy drive
assignments so that Drive A becomes Drive B, and Drive B
becomes Drive A. By default, this field is set to
Disabled.
z
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40
or 80 tracks, installed in the system. 360Kb type is 40 tracks
while 720Kb, 1.2MB and 1.44MB are all 80 tracks. The default
value is
“Enabled” .
Enabled
BIOS searches for floppy disk drive to determine if it is
40 or 80 tracks. Note that BIOS can not tell from 720K,
1.2M or 1.44M drive type as they are all 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by
track number. There will be no warning message
displayed if the drive installed is 360K.
z
Boot Up NumLock Status
This option enables and disables the numberlock function of the
keypad. The default value is
“On” .
On Keypad functions confine with numbers
Off
Keypad functions convert to special functions (i.e.,
left/right arrow keys)
z
Security Option
This item allows you to limit access to the system and Setup, or
just to Setup. The default value is
“Setup” .
System
The system will not boot and access to Setup will be
denied if the incorrect password is entered at the prompt.
Setup
The system will boot, but access to Setup will be denied
if the correct password is not entered at the prompt.
NOTE:To disable security, select PASSWORD SETTING
at Main Menu and then you will be asked to enter
password. Do not type anything, just press <Enter> and it
will disable security. Once the security is disabled, the
system will boot and you can enter Setup freely.