AXIOMTEK SBC81872, Руководство пользователя

Страница: 58 / 73

Award BIOS setup
52
7.6 Integrated Peripherals
This option sets your hard disk configuration, mode and port.
z
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface
with support for two IDE channels. Select
Enabled to activate
each channel separately.
The choice: Enabled, Disabled.
z
On-Chip Serial ATA
Select Disabled to disable the onboard SATA.
Select Auto that the system will detect the existing SATA and
IDE drives then automatically set them to the available
master/slave mode.
Select Comnined Mode, this option allows you to use both IDE
and SATA drives; allowing a maximum of 4 drives – 1IDE
mastere, 1IDE slave and 2 SATA. You must manually set the
SATA and PATA drives Mode in the PATA IDE Mode and SATA
Port fields.
Select Enhanced Mode, this option allows you to use one IDE
and SATA drives; allowing a maximum of 4 drives-1IDE
master;1IDE Slave and 2 SATA.
Select SATA Only, this option automatically sets the SATA drives
to Primary Master Mode. Since the SATA drives are in Master