UMAX090600 Version 1
Preliminary Documentation – May be Subject to Change
21-48
As mentioned earlier, a CAN Receive function block can be selected as the source of the control
input for the output function blocks. When this is the case, the
Received Data Min (Off Threshold)
and
Received Data Max (On Threshold)
setpoints become the minimum and maximum values of the
X-axis used in the linear calculations. As the names imply, they are also used as the On/Off
thresholds for digital input types. These values are in whatever units the output data is AFTER the
resolution and offset is applied to the CAN data.
The CAN-BC-LED Controller supports up to 8 unique CAN Receive Messages. By default, each
message is pre-configured to read a particular type of data. The details are outlined in Section 3.4,
and the default list is shown in
Table 6
below.
Block # Default Receive Data
1 Not
Used
2 Not
Used
3 Not
Used
4 Not
Used
5 Not
Used
6 Not
Used
7 Not
Used
8 Not
Used
Table 6: Default CAN Receive Messages
