manualshive.com logo in svg

AXIOMATIC AXTC4CO, Руководство пользователя

Поделиться
Скачать
AXIOMATIC AXTC4CO Скачать руководство пользователя страница 12

 

 

UMAXTC20CO V1.1.1              Preliminary Documentation – May be Subject to Change                                      12-59 

2.2. Installation 

Instructions 

 
NOTES & WARNINGS 

  Do not install near high-voltage or high-current devices. 

  Ground the chassis for safety purposes and proper EMI shielding. 

  Note the operating temperature range.  All field wiring must be suitable for that temperature 

range. 

  Install the unit with appropriate space available for servicing and for adequate wire harness 

access (15 cm) and strain relief (30 cm). 

  Do not connect or disconnect the unit while the circuit is live, unless the area is known to be 

non-hazardous. 

 

MOUNTING 
 

The module is designed for mounting on the engine.  If it is mounted without an enclosure, the 
Thermocouple Scanner should be mounted horizontally with connectors facing left or right, or with 
the connectors facing down, to reduce likelihood of moisture entry.  
 
The thermocouple wires and CAN communication cable are considered intrinsically safe.  The 
power wires are not considered intrinsically safe.  
 
Mask all labels if the unit is to be repainted, so label information remains visible. 
 
Mounting legs include holes sized for M6 or ¼ inch bolts.  The bolt length will be determined by the 
end-user’s mounting plate thickness.  Typically 20 mm (3/4 inch) is adequate. 

 

If the module is mounted off-engine, no wire or cable in the harness should exceed 30 meters in 
length.  The power input wiring should be limited to 10 meters. 

 
CONNECTIONS 
 

Use the following Deutsch IPD mating plugs to connect to the integral receptacles.  Wiring to these 
mating plugs must be in accordance with all applicable local codes.  Suitable field wiring for the 
rated voltage and current must be used.  The rating of the connecting cables must be at least 
85°C.  For ambient temperatures below –10°C and above +70°C, use field wiring suitable for both 
minimum and maximum ambient temperature.    
 

Receptacle  
 

Mating Sockets as appropriate 
(Refer to 

www.laddinc.com

 for more information on the 

contacts available for this mating plug.) 

Power and CAN bus:   

DTM06-12SA and wedge WM12S 

Thermocouple Interface Receptacle:    DTM06-12SB and wedge WM12S 

Содержание AXTC4CO





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды