- 22 -
correctness. A few barcode types have no check digits at all.
This screen is to allow the user to select specifically for the barcode
types that have optional check digits. If these are being used then the
verifier can be set to validate them, if not then to ignore any checks.
The next tab is “
Appearance
” –
This can be used to adjust any display
colours/shades for the pass, warning and
fail messages – and can also be used to
add Windows wave sounds to give an
audible indication of quality if required.
The next tab is “
Printing
”
The user can pre-select any particular
reports that are required – some users
take the view that if the barcode passes
they will just save the electronic report
but that if the barcode fails they want all of the information possible –
the required prints can be pre-selected.
This includes the option to have a personalised report generated through
the built-in Report Generator, although we do recommend that if you
have any particular non-standard requirements these should be discussed
with Axicon.
The verifier can also be set to “Auto-print” in order to avoid a user
forgetting to print a particular report.
“Print graph in Black and White” – essential to tick this is you are using a
monochrome (black and white) printer, otherwise a scan reflectance
profile will only show the outline and not the detail.
Also, the standard printed report can be personalised if required using
the “Report Header” feature.