Axia xSelector, Инструкция по установке и эксплуатации

Страница: 13 / 57

1: I
nt
ro
du
ci
ng t
he x
S
el
ec
to
r •
5
Chapter One:
Introducing the xSelector
This section will introduce you to xSelector, a networked router selector node with one input and one output.
Streams received by xSelector can be easily selected from a list of available sources using the front panel display
screen. Additionally, six frequently-used streams can be assigned to front-panel filmcap buttons for instant access. A
headphone jack and volume control round out the front panel.
While xSelector is a handy audio selector when installed in the studio, it can also be a useful piece of test and
monitoring equipment in the Technical Operations Center or rack room.
xSelector is also AES67 compatible. AES67 is the standard for audio over IP interoperability approved by
the Audio Engineering Society in September 2013. AES67 compliance means that different AoIP formats such as
Livewire, Ravenna and others can all work and play well together.
xSelector Features
• Rear panel audio I/O with RJ45 or XLR
»
1 Stereo Analog input or AES-3 input (AES data stream presence pre-empts analog input)
»
1 Stereo Analog output and 1 AES-3 digital audio output (simultaneous)
• 1 Headphone output (mirrors selected audio output)
• Volume control for headphone and rear output (selectable)
• 2 GPIO ports, each with five opto-isolated inputs and five opto-isolated outputs
• OLED display for source selection, metering, GPIO status, and setup
• Dual mirroring redundant 100BT Ethernet ports or secondary management port
• Thermal sensor for over temperature status
• IEEE 1588 synchronization support
• Ravenna stream routing support
• AES-67 compatible