Axia xSelector, Инструкция по установке и эксплуатации

Страница: 9 / 57

Qu
ic
ks
ta
rt •
1
Quickstart
Fast Setup
Thanks for purchasing xSelector! Like all Axia xNodes, xSelector has a one-minute Fast Setup capability that
automatically assigns a network IP Address and Livewire Output Channel based upon a two-digit ID Number you
assign. Here’s how:
1.
Apply power
to the xSelector and let it boot. You’ll see a title screen in a few seconds.
2. Push in the knob on the right side 3 times, or until the screen says ‘Node’ in the top left corner.
3. Push in the knob on the right and and hold it for 10 seconds . You will see the Page icon highlight; as
you continue to hold, the Pencil icon will highlight. You’re now in Edit Mode, as shown in the photo below.
Release the knob.
4. Give your xSelector an ID number . Rotate the knob to change the numerical value at the cursor. When
you’ve got the value you want, Press the knob once to move to the next position.
Example: Press the knob once, rotate it one click clockwise to enter the numeral “1” . Press the knob again;
the cursor moves to the right and a “0” appears; you’ve entered an ID number of “10 .”