Axia xSelector Скачать руководство пользователя страница 42

Страница: 42 / 57

3: I

n De

d P

g •

If Bank 1 and Bank 0 already have software present, and the xSelector is running from Bank 1, there will not

be a Browse button allowing you to select a file for upload. In such cases, you will need to select the check box

Commit this version to Bank 0

and press the

Apply

button. Doing so will move the active software from Bank 1 to

Bank 0, and clear Bank 1 so that a new version can be uploaded.

Committing from Bank 1 to Bank 0 does not require a reboot. After Bank 1 is empty, you can perform the steps

outlined above to upload your new firmware.

Performing a Reset to Factory Default Settings

There should rarely be a need to reset your xSelector to its factory default settings, but if this need arises, follow

the procedure below to remove all configuration data and return the unit to factory-fresh settings:

• Disconnect all power from the xSelector.

• Apply power and quickly press and hold the two front panel encoders.

• xSelector will show a countdown timer for factory reset. When the timer reaches 0, release the two encod-

ers.

Wrapping It Up

If you’ve read this manual from start to finish, congratulations: you’ve earned your xSelector merit badge!

If you still have questions, don’t hesitate to contact our 24/7 Support engineers. And as always, we welcome

your suggestions for improving this manual, or xSelector. Contact Axia with your comments:

Axia Audio, a Telos Alliance Company
1241 Superior Avenue E.

Cleveland, OH., 44114
USA

+1-216-241-7225 (phone)
+1-216-241-4103 (fax)
+1-216-622-0247 (24/7 technical support)

[email protected]

Содержание xSelector

























































Результаты поиска

Содержание xSelector

Отзывы:

Похожие инструкции для xSelector

Бренды по названию

Популярные бренды

Axia xSelector, Инструкция по установке и эксплуатации

Результаты поиска

Содержание xSelector

Отзывы:

Похожие инструкции для xSelector

Бренды по названию

Популярные бренды