Axetris LGD F200P2, Инструкция по эксплуатации и интеграции

Страница: 7 / 61

Axetris AG LGD F200P2 Operating Instructions - Rev D 19.09.2018 7/60
CAUTION

Product damage

Read all instructions carefully before using the device.

The LGD F200P2 gas sensor modules are not designed to sense liquid flow and damage will
result if liquid is passed through the sensor.

Gas loaded with particles will eventually contaminate the optics and affect the performance of the
sensor. Please consult our TCS (Technical Customer Support) accordingly.

Do not use direct insulation around the heated version. This leads to overheating of the sensor.

The appliance must not be used in damp or moist surroundings.

Only use accessories indicated in the instructions for use or which are recommended by
the manufacturer.

Failure to comply with these instructions can result in product damage.
Danger to life

The heated version of the sensor modules (indicated by an H) employs a heated element.

The temperature of the heated element is above the ambient temperature. The sensor must not
be used with flammable or explosive gases or mixtures.

Unprofessional gas handling can cause injury or death. The use of the gas sensor modules should
only be performed by qualified personnel.

Do not use this product as a safety or emergency stop device or in any other application where
failure of the product could result in personal injury or death.

IF THE LGD F200P2 IS PROVIDED WITH GAS OUTSIDE THE OPERATING RANGE
(TEMPERATURE AND PRESSURE) THERE IS NO WARNING THAT THE LGD F200P2 IS NOT
WORKING PROPERLY!

IF THE TEMPERATURE OF THE GAS PROVIDED IS HIGHER THAN THE CELL, A HIGH RISK
OF CONDENSATION AND IRREVERSIBLE DAMAGE OF THE CELL EXISTS.

DO NOT OPEN THE LGD F200P2 MEASUREMENT HEAD: LASER CLASS 1 INSIDE.
DO NOT USE THE SYSTEM IN AN EXPLOSIVE ATMOSPHERE: NOT ATEX CERTIFIED.
DO NOT USE WITH EXPLOSIVE GAS MATRIX: NOT ATEX CERTIFIED.
LASER RADIATION – DO NOT VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS - CLASS 1 LASER PRODUCT
Peak Power 2.5 mW - Wavelength: 1500 - 2000 nm