Axeon Water Technologies CT-4000, Руководство пользователя

Страница: 23 / 54

23
ENGF-107 REV. A 01/11 © 2011 AXEON Water Technologies
SYSTEM PURGING
Carefully inspect your system before initial start-up. Check that all plumbing and
electrical connections are not loose or have not come undone during shipment. A User’s
Manual, Test Results, and Filter Housing Wrench will accompany your CT-Series
reverse osmosis system.
NOTE: LEAVE THE POWER TO THE SYSTEM OFF FOR THIS PROCEDURE.
1. Redirect permeate water to the drain for this procedure.
2. Fully open the concentrate valve #11 (Counter Clockwise). (Figure 1B, Page 16)
3. Fully close the recycle valve # 10 (Clockwise) (If Applicable). (Figure 1B, Page 16)
4. Offset the position of the bypass white lever on the solenoid valve #1. (Figure 2,
Page 22)
5. Turn the feed water on and let the system purge until no visible bubbles appear from
concentrate flow meter #15. (Figure 1B, Page 16)
6. Fully open the throttle valve #13 (Counter Clockwise). (Figure 1B, Page 16)
Lever Inline Lever Offset
Operating Position Bypass Position
FIGURE 2