Axema Unitel DI-623-21L, Инструкция по установке и эксплуатации

Страница: 7 / 16

AXCALL
5
Example 2 : Program a code (# 154) with 4 digits (5678) which should be disabled if
PL2:15 PL2:16 is closed. (2).
- Enter your password .
- Press # 154 5678# 1 2
- Press *. The unit returns to working mode.
If you enter more codes you only have to press * when the programming is finished,
and not after each code. * also works as "break" during programming.
The programmed codes/numbers and their functions could be checked with printout
# 82.
Note: If a code/number is included in the six digit password, e.g. if your password is
123456, and an 1234 is a door code, the door will open on 1234 and the code lock will
enter programming mode after 6 digits.
4. CANCEL CODES/TELEPHONE NUMBERS
If you want to cancel number or a code e.g. code 1, do the following:
- Enter your password .
- Press # 101 # #. The code is erased and the code lock returns to progra mming
mode.
- Press *. The unit returns to working mode.
5. PROGRAMMING OF TIME OF RELAY AND CALL
Enter opening in seconds (default value 7 sec.) .
- Enter your password . You will hear a beep every second.
- Press # 51 double beep < 01-99> and you hear two short and one long.
- Press *. The unit returns to working mode.
Ex: # 51 07 = 7 seconds
Enter opening in minutes.
- Press # 52 instead of # 51 .