Axema Unitel DI-623-21L, Инструкция по установке и эксплуатации

Страница: 10 / 16

AXCALL
8
Installed by Company: ....................................................
Name: ..........................................................
Telephone: ..................................................
Password: ..................
10. ADDITIONAL PROGRAMMING
Besides what’s earlier mentioned in this manual, there are two functions that could be
reprogrammed. The short beep that comes every 5:th second can be disabled, and the
line test during calling can also be disabled.
The first function, disable the beep is up to the user to decide whether it’s disturbing
or not. Line test need to be disabled in some cases, e.g. if the power on the line is to
low (below app. 20V = red LED flashes), or in the case the PABX detects the break as
an impulse 0:a ( dead or fault connection).
Following settings is possible:
0 = Disabled beep and Enabled line test.
1 = Enabled beep and Enabled line test. (default at 199200).
2 = Disabled beep and Disabled line test.
3 = Enabled beep and Disabled line test.
For setting:
- Disconnect the power.
- Press and hold the button on front keypad corresponding to the setting you
want.
- Connect the power, when holding the button.
- Release the button and the setting is stored in memory.
Note! At reset 199200 function (1) is set.