Axema Unitel DI-623-21L, Инструкция по установке и эксплуатации

Страница: 9 / 16

AXCALL
7
7. PROGRAMMING OF UNIT-ID
If you have more than one door unit the printer outputs can be connected in parallel
to one printer or PC. To be able to know to which unit the printout belongs, you must
give all units a unique number. This is done in the following way:
- Enter your password .
- Press # 44 and you hear a double beep.
- Enter a 2-digit number (01-99) and you hear two short one long.
- Press *. The unit returns to working mode.
8. PRINTOUT
Printout of codes, telephone numbers and functions is done with # 82 .
- Enter your password .
- Press # 82 , system data, codes/numbers, there addresses and functions are
printed out.
Example of printout:
The printout shows that this is a DI-623-21L software version 1.0 with the unit-ID 01.
The second line indicates that the “open with five”-function is disabled and that the
length of the calling number is 4 digits. Line 3 shows that the opening time is 7 sec.
and line 4 that the time of call is 60 sec. Line 5 shows that if you if you close PL1:6
and PL2:16, or if you press button one on a connected ADI-623-08 the number 722 40
00 is called and that this function not could be time controlled. Finally line 6 indicates
that 1234 is an access code that could not be time controlled.
9. TECHNICAL DATA
Power supply: 12 - 24VDC
12 .- 18VAC
Power consumption: 25mA (idle)
100mA (max)
Max load
of relay contacts:
30VDC 2A
Printer output 1200 baud