Axema Unitel DI-623-21L, Инструкция по установке и эксплуатации

Страница: 8 / 16

AXCALL
6
Enter time of call in seconds (default value 60 sec.) .
- Enter your password . You will hear a beep every second.
- Press # 53 double beep < 01-99> and you hear two short and one long.
- Press *. The unit returns to working mode.
Ex: # 53 60 = 60 seconds
Enter time of call in minutes.
- Press # 54 instead of # 53 .
6. PROGRAMMING OF SPECIAL FUNCTION
As mentioned in the introduction you may open the door from your telephone. This
is done by pressing 5 on the keypad. By programming #39 and the first of two func-
tion digits, you can chose if and when this function is activated. (
#39 is set to 04 by
default or by reset).
The first function digit which controls the “open with 5”-function is:
< 0 > - Always activated
< 1 > - Disabled if PL2:15 PL2:16 is open .
< 2 > - Disabled if PL2:15 PL2:16 is closed .
< 3 > - Always disabled.
To prevent a person to call a number outside the company, you can limit the length
of the number that can be dialled from the keypad. Numbers that are programmed in
the memory are not influenced. The limit is set by programming a second digit after
#39 . This digit can be between 0 and 9 .
Example 3 : Program so that open door with five always work (0) and that the length
of the telephone number is maximum 3 digits (3).
- Enter your password .
- Press # 39 0 3
- Press *. The unit returns to working mode.
After initialisation “open with five” is set to always work and the length of number is
set to 4 digits. You may reset this default set-up by programming # 39 #. If you pro-
gram #39x0, it means that you only can use programmed direct buttons.