DETAIL OF HYBRID REMOTER FOR MACROTEL X1
| DETAIL OF HYBRID REMOTER FOR MACROTEL X1
38
14.5.2 Hybrid 2 Section (featured only on Macrotel X2)
In this section all the parameters relating to the Hybrid-2 (Hybrid 2) of Macrotel X2 can be set.
INPUT SOURCE:
This is the input of the Hybrid 1, i.e. what is sent (SEND) to the telephone
interlocutor. The options available are: Analog, Microphone and Tone Generator.
ANALOG SENSITIVITY:
this is the sensitivity of the balanced analog input. Range of allowed
values: from -12.0 dBu to a maximum of +12.0 dBu in 0.1 dBu steps.
MICROPHONE GAIN:
this is the sensitivity of the analog input (send) but with a higher input
sensitivity: the analog audio signal amplification values allowed, range from g +10dB to a
maximum of +40.0 dBu in 1 dB steps. A +48V phantom power supply is not available for this input.
2Wire Name:
this field is used to associate a mnemonic name to the 2Wire line, which is shown on the Macrotel X1 and
Macrotel X2 front LCD panel. To modify the name change the field and press “Return”.
GSM Name:
this field is used to associate a mnemonic name to the
GSM connected line, which is shown on the Macrotel X1 and Macrotel
X2 front LCD panel.
These two “names” are important because they make it easy to
recognise which line is connected to the Telephone Hybrid 1; in fact the
POTS and GSM lines can both be used, but not at the same time.
These two lines are mutually exclusive.
