
DATASET 1 CONFIGURATION
18.5 DI (DECODER IDENTIFIER)
DI
(
DECODER IDENTIFIER
): This dropdown menu allows you to
select the modulation type (Stereo, Mono, etc.). The stereo
modulation is assigned to
STEREO, STATIC PTY,
while the mono is
assigned to
MONO, STATIC PTY
.
Click OK to confirm, or ESC to exit without saving.
18.6 LINKAGE INFORMATION (LA, EG, ILS, LSN)
This can be accessed via the 'Basic Services' panel.
Linkage information provides a means with which various programme services (each featuring its own PI code) can be
processed by a receiver as a single service within the same times of a common programme.
During these times, each programme service maintains its own unique identity, i.e. the programme service must keep its
own PI code and the AF (Alternate Frequency) list or lists assigned to it, but it can change the features of the program,
such as PS, PTY, RT, TP and TA, in order to reflect the common programme;
With LA=1, a service which includes codes TP=1 or TP=0/TA=1 does not have to be linked to another service
which includes codes TP=0/TA=0.
The linkage information is transmitted in the four data elements below:
1) LA – Linkage Actuator (1-bit)
2) EG – Extended Generic (1-bit)
3) ILS – International Linkage Setting (1- bit)
4) LSN –Linkage Setting Number (12-bit)
18.7 TP, TA, MS SETTINGS AND RELATIVE REMOTE MANAGEMENT
Open the 'Basic Services' page in the Main Network (see section above).
TP - Traffic Program
can be flagged to enable traffic announcements to be included during the programme tuned into.
The TP element most only be flagged for programs which switch dynamically to TA identification during traffic
announcements. It can be set to Enabled or Disabled.
TA -
The
Traffic Announcement
element is an on/off signal designed to signal when there is a Traffic Announcement
on the air. To enable it, see the section below.
The TA
and
M/S statuses can be
:
-
Fixed
(enabled/disabled)
-
Associated with the relative
UECP
command
-
Associated with the statuses of one of the four
inputs on the GPIO port
| DATASET 1 CONFIGURATION
- 68
Содержание Falcon VS
Страница 1: ...Falcon XT User Manual FM Audio Processor Rev 2 2 ENG...
Страница 25: ...BLOCK DIAGRAM OF FALCON XT 10 BLOCK DIAGRAM OF FALCON XT BLOCK DIAGRAM OF FALCON XT 25...
Страница 96: ...TECHNICAL APPENDIX 20 6 4 Operative Example TECHNICAL APPENDIX 96...
Страница 106: ...APPENDIX I FALCON XT MIB 23 APPENDIX I FALCON XT MIB APPENDIX I FALCON XT MIB 106...