Axel Falcon VS, Руководство пользователя, Страница: 24 / 111

FALCON XT – GENERAL DESCRIPTION
5
ANALOG OUTPUT
ANALOG audio output of the Falcon XT audio processor. Electronically
balanced output on XLR connector (type: stereo / mono)
6
ANALOG INPUT
(ANALOG INPUT –A)
ANALOG audio input of the Falcon XT audio processor, with
electronically balanced XLR connection.
7
MPX UNIT
MPX OUTPUTS
MPX INPUTS
“
MPX OUTPUTS ” unit: this contains the two output MPX lines. These
MPX outputs are buffered and totally independent of each other, and the
levels of the MPX output (but not of the individual Audio, Pilot, and RDS
carriers) can be set individually via remote control software or directly on
the front panel. The level of the subcarrier components cannot be altered
on one output only.
“
MPX INPUTS ” unit: this section contains two auxiliary broadband inputs
(AUX or SCA), which are added directly to the MPX-OUT -1 and/or the
MPX-OUT -2 .
The signal from
AUX-1 can be sent to MPX-OUT -1 and also to MPX-
OUT -2 at the same time, or just to MPX-OUT -2 .
The same can be done for the signal from
AUX-2 , sending it to MPX
OUT-1 and to MPX-OUT -2 at the same time as, or just to MPX-OUT -2 .
For more information, see the block diagram of the machine.
8
POWER SUPPLY UNIT
The power supply unit features a switch to switch on the device and a
power socket. For the change of the fuse, see the relevant chapter. The
fuse is located inside the device, near the switching power supply unit.
The fuse is of the slow blow type, 230 V a.c. and 2,000 A, equal to 2000
mA
9
SERIAL -2 RS232
SERIAL PORT 2
The Falcon XT features two serial ports for device control via the remote
control software.In this case,
Serial-2 is the port selected. The control
features are the same as for the USB control port. Using the Axel
Universal Software Remoter control software, you can change the
operating parameters, levels, and compression, as well as the audio
process/processing.
Using
Axel Universal Target Address Manager you can set the
machine’s individual address in UECP format, set RDS to work in UECP-
compatible mode or extended mode, and reset any or all of the RDS
service datasets.
10
ETHERNET PORT
Falcon XT is fitted with an Rj45 Ethernet port for LAN/WAN-type
connections, to monitor and control the device. This port also provides an
integrated web server, so the Falcon XT can be controlled remotely using
a standard web browser. The same port also features an SNMP agent,
and an ASCII Parser (
see Appendix ).
| FALCON XT – GENERAL DESCRIPTION - 24