Axel Falcon VS, Руководство пользователя, Страница: 29 / 111

USE OF UNIVERSAL REMOTER SOFTWARE
13 USE OF UNIVERSAL REMOTER SOFTWARE
The Universal Remoter is powerful control/monitoring software which can be used for the entire series of audio
processors, including:
- Falcon 3i
- Falcon VS
- Falcon XT
This single software package can be used to can control three different types of audio processors, stereo encoders, and
RDS generators. There are two software operation modes: "Single Target Mode" and "Network Mode", as outlined
below.
Universal Remoter start window
13.1 “SINGLE TARGET MODE” OR “NETWORK MODE”?
"Single Target Mode" means the "
local " connection, therefore two-way data communication will be established between
a Falcon device and a monitoring and control PC. This connection can be via RS232 serial port, USB A - B connection or
via LAN using the Ethernet port (if featured on the device).
"Network Mode”, meanwhile, means a "
distant " connection, without a return data channel. A connection of this kind is
generally established in cases of audio processors installed on remote transmission sites or in locations without a return
data channel. This connection is usually common with audio transfers via satellite, where configuration data can be sent
in one-way mode (uplinking to the transmitter site). Of course, you will not know if the command has been successfully
received or whether it has been executed correctly by the audio processor. That is why a redundancy check is added,
which allows the same command to be sent several times, so that it can be received and executed.
| USE OF UNIVERSAL REMOTER SOFTWARE - 29