Axcess NT132, Руководство по установке, Страница: 41 / 110

Configuring 3.x Reader Firmware
© 1999, AXCESS
TM
Inc. 750.001.003
Revised June 1999
41
Changing the Reader ID Number
IMPORTANT! All Readers are given the same ID number (127) at
the factory. Each Reader needs to be set with a unique ID number to
eliminate the possibility of cross talk (i.e., a Tag broadcasting to an
incorrect Reader) in multi-Reader applications.
Step 1: At the “Enter:” prompt, type a pound sign ( # ) followed by
a two-number code (01-32). See Table 1 for codes and
their corresponding Reader ID numbers.
Do not press Enter.
The Reader will respond with “Selected Value: #NN”
where NN is the code that you entered, and “Reader
ID=XXXXX” where XXXXX is the new Reader ID number
corresponding to the code entered.
For example, if you type:
Enter: #10
The Reader will respond with
Selected Value: #10
Reader ID=00106
The new Reader ID number will be kept even after a
power off/on cycle.
Code to
Enter
Reader
ID #
Code to
Enter
Reader
ID #
00 00000 16 00080
01 00033 17 00113
02 00034 18 00114
03 00003 19 00083
04 00100 20 00052
05 00069 21 00021
06 00070 22 00022
07 00103 23 00055
08 00072 24 00024
09 00105 25 00057
10 00106 26 00058
11 00075 27 00027
12 00044 28 00124
13 00013 29 00093
14 00014 30 00094
15 00047 31 00127
Table 1 Reader ID codes and numbers