AVYCON AVC NBL21M-L1, Руководство пользователя

Страница: 31 / 65

2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the camera is disconnected, the system will trigger the
alarm out.
4.4.3 Alarm In
To set sensor alarm (alarm in):
Go to Config

Alarm

Alarm In interface as shown below.
1. Click “Enable” and set the alarm type, alarm holding time and sensor name.
2. Set alarm trigger options. The setup steps are the same as motion detection.
Please refer to
motion detection chapter for details.
3. Click “Save” button to save the settings.
4. Set the schedule of the sensor alarm. The setup steps of the schedule are the
same as the schedule recording setup. (See
Schedule Recording ).
For the model with two alarm input interfaces, you shall select the sensor ID first.
Then set the relevant trigger items. Click “Apply settings to” to quickly apply the
settings to the other alarm input.