To set the detection area:
Click “Draw Area” and drag the border lines of the rectangle to modify its size. Click
“Stop Draw” to stop drawing the area. Click “Clear” to clear the area. Then set the
detectable size by defining the maximum value and the minimum value (The
default size range of a single image occupies from 5% to 50% of the entire image).
To set the blocked area:
Select the number of the undetected area. Then click “Draw Area” to draw a closed
area. Up to 4 areas can be set up. After you set the blocked area, this area will not
be detected.
5.
Set the schedule of the A-LPR. The setup steps of the schedule are the same as
schedule recording setup (See
Schedule Recording
).
6.
NAdd vehicles to the vehicle Database. Click the vehicle database tab to go
to
the following interface.
Содержание AVC NBL21M-L1
Страница 1: ...AVCNBL21M L1 2MP LPR BULLET CAMERA MANUAL ...
