AVYCON AVC NBL21M-L1, Руководство пользователя

Страница: 29 / 65

Move the “Sensitivity” scroll bar to set the sensitivity. Higher sensitivity value
means that motion will be triggered more easily.
Select “Add” and click “Draw”. Drag the mouse to draw the motion detection
area; Select “Erase” and drag the mouse to clear motion detection area.
After that, click the “Save” to save the settings.
3. Set the schedule for motion detection. The schedule setup steps of the motion
detection are the same as the schedule recording setup (See
Schedule
Recording ).
4.4.2 Other Alarms
1. Go to Config

Alarm

Anomaly

SD Card Full.
2. Click “Enable” and set the alarm holding time.
3. Set alarm trigger options. The setup steps are the same as motion detection.
Please refer to motion detection chapter for details.

SD Card Error
When there are some errors in writing SD card, the corresponding alarms will
be
triggered.
1. Go to Config

Alarm

Anomaly

SD Card Error as shown below.