AVYCON AVC NBL21M-L1, Руководство пользователя

Страница: 33 / 65

Day/Night Switch Linkage: Having selected this mode, select the alarm type and
then choose to open or close alarm out when the camera switches to day mode
or night mode.
Timing: Select the alarm type. Then click “Add” and drag the mouse on the
timeline to set the schedule of alarm out; click “Erase” and drag the mouse on the
timeline to erase the set time schedule. After this schedule is saved, the alarm out
will be triggered in the specified time.
4.4.5 Alarm Server
Go to Alarm

Alarm Server interface as shown below.
Set the server address, port, heartbeat and heartbeat interval. When an alarm
occurs, the camera will transfer the alarm event to the alarm server. If an
alarm server is not needed, there is no need to configure this section.
4.5 Event Configuration
For more accuracy, here are some recommendations for installation.

Cameras should be installed on stable surfaces, as vibrations can affect the
accuracy of detection.

Avoid pointing the camera at the reflective surfaces (like shiny floors, mirrors,
glass, lake surfaces and so on).

Do not aim the camera at the sun, road lamp or headlights of the car.