AVTECH Software, Inc.
Page 14
AVTECH.com
Room Alert 32S (RA32S-DAP-RAS)
In the example below, we will configure a Digital Temperature Sensor:
1. In
Sensor Label
, you may leave the default label, “Internal Sensor” (or “Ext Sensor 1,”
etc.) or rename it to something more descriptive, such as “Server Rm Temp.”
Tip
2. The
Alarm On
field automatically fills in—in this case with “Temperature (F).”
Note
3. The
High
and
Low
fields are disabled by default.
•
To enable a High or Low threshold, select the check box in that field.
• You may then leave the default value or enter a custom temperature threshold.
• Your Room Alert will generate alerts based on these thresholds.
4. In
Adjust
, you may enter a value to adjust the temperature reading if it differs from a
known value at that location.
5. In
Use Alarm Profile
, which controls light towers and relays on your Room Alert, you
may leave the default,
Profile 1
, or choose another profile from the drop-down menu.
Note
6. Select
Save Settings
at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
Tip
Room Alert 32S sensor labels may be up to 30 characters and can include the
following: letters, numbers, spaces, and special characters.
Refer to the
section in this manual for instructions on setting the
default temperature scale.
If you have an AVTECH Light Tower, Relay Switch or built-in relays on your
Room Alert, you may configure Alarm Profiles to toggle them on and off when
alarms are detected. Please refer to the
further information.
The options in the Sensor Alarm Configuration fields vary slightly depending on
the type of digital sensor.