AVTECH Software, Inc.
Page 30
AVTECH.com
Room Alert 32S (RA32S-DAP-RAS)
configured to use. The default is
HMAC MD5 authentication protocol
.
• In
Authentication Password
, enter the authentication password that’s configured in
your SNMP monitoring program.
• In
Privacy Password
, enter the privacy password that’s configured in your SNMP
monitoring program.
3. Select
Save Settings
at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
SNMP Trap Sending Configuration
You may configure your Room Alert to send SNMP Traps in response to a change in alarm
state to up to three host systems running 3rd-party SNMP monitoring applications. Each host
system you enter in these fields will receive the same SNMP Traps simultaneously.
To configure your Room Alert to send SNMP Traps:
1. In
Trap Send IP 1
, enter the IP address of the host system that runs your 3
rd
-party
SNMP monitoring application.
2. In
Trap Send IP 2
and
Trap Send IP 3
, you may enter the IP addresses of other host
systems that run 3
rd
-party SNMP monitoring applications, or leave the default, 0.0.0.0.
3. Select
Save Settings
at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
