Avocent SPC 800, Инструкция по установке и эксплуатации

Страница: 43 / 52

Chapter 3: Operations
37
All - grants port access to Admn, Gen1 and Gen2; this is the default
Admn - grants port access to Admn
Gen1 - grants port access to Admn and Gen1
Gen2 - grants port access to Admn and Gen2
Page field
The editable Page field may contain a name for the current control screen
page. When you want to display a specific page of the control screen, you may
use this page name as a parameter in the Show command, or you may specify
a page with its absolute name: .A for page 1, .B for page 2, .C for page 3 and
.D for page 4.
To specify a page name:
1. Position the cursor in the Page field.
2. Press e . If you are changing an existing name, use the Spacebar to erase
characters. Type a 1-8 character string. Press Enter or Tab .
Ending a Session
You may end a session from the command line or the control screen.
If you made configuration changes during the session, they are automatically
stored in non-volatile memory. After you end the session, wait for the
following message before taking any action that will power down the SPC:
Updating configuration memory . . .
Update complete
Session ended
A session ends automatically after five minutes of inactivity, but if you have
made any configuration changes during the session, they will not be saved.
To end a session:
From the SPC: prompt, type quit and press Enter .
- or -
From the control screen, press
q .